How to Reset Skullcandy Wireless Earbuds? [Step-By-Step]

How to Reset Skullcandy Earbuds?

Here are the steps on how to reset any Skullcandy earbuds;

1. Firstly, ensure that no device is paired with your earbuds.
2. If it’s paired with any device, go to the device’s Bluetooth settings and remove(forget) the Skullcandy earbud from the list.
3. Next, turn off the earbuds and wait for a few seconds.
4. Now, press the ‘+’ and the power button simultaneously for about 5 seconds to reset the earbuds.
5. Finally, you can pair your earbuds with a new device.

How to Reset Dime Black Earbuds?

Here’s how to reset the Skullcandy Dime earbuds;

1. Begin by unpairing the device previously paired with your earbuds. You can do this by going to the device’s Bluetooth setting and removing the Dime earbuds from the pairing list.
2. Now take out the earbuds from the case and wait for a few seconds until the Dime earbuds turn on automatically.
3. Once you are sure your earbuds are not connected to any other device, press one of the earbud buttons twice and press it for 2 seconds.
4. You will notice red and blue lights flashing that indicate you have successfully reset the earbuds and they are ready to pair with a new device.

How to Reset Indy Evo Earbuds?

Follow these steps to reset Skullcandy Indy Evo;

1. First, unpair any device previously paired with your earbuds. Go to Bluetooth settings in your device and remove (forget) the Skullcandy earbuds from the pairing list.
2. Next, press the power button on both earbuds for 6 seconds to turn them off.
3. Now, press the power button again for 10 seconds.
4. Place the earbuds in the charging case and wait until the red LED lights flash.
5. Remove the earbuds from the charging case. You will see blue LED light flashing, which means both earbuds are powered on and synced.
6. Furthermore, a voice prompt will confirm the earbuds are synced.

Now you can pair the Indy Evo with any device you like.

How to Reset Skullcandy Push Wireless Earbuds?

Here’s how to reset Skullcandy Push earbuds;

1. Begin by ensuring no device is paired with your earbuds.
2. If it’s paired with any device, go to the device’s Bluetooth settings and remove(forget) the Skullcandy Push earbuds from the list. Moreover, turn off the Bluetooth.
3. Now you must remove the Push earbuds from the charging case and turn them off manually.
4. Press both the power buttons for 6 seconds to power them off.
5. Once you are sure the earbuds are powered off, press both power buttons for 10 seconds to reset your Push earbuds.
6. Place both earbuds into their charging case and see if the red LED light flashes.
7. Remove the earbuds from the charging case if you see red LED light.
8. Now both earbuds will be turned on automatically, and the two LED lights will blink blue.

How to Reset Jib Wireless Headphones?

Below are the steps on how to reset jib true wireless earbuds;

1. Ensure your old devices have forgotten the Jib earbuds and turn off the device’s Bluetooth.
2. Next, remove the earbuds from the case and press both power buttons for 4 seconds to turn them off.
3. Now press both the power buttons for 10 seconds to reset the earbuds.
4. Again, power the earbuds off and on.
5. If the reset is successful, the earbuds will power on automatically, and the blue lights will blink, indicating both earbuds are synced and ready to pair with a device.

How to Reset Skullcandy Crusher Wireless Headphones?

Follow these steps to reset the Skullcandy Crusher earbuds;

1. Long-press both the upper and lower buttons on the right side of the headphones until the yellow LED light flashes for 3 seconds.
2. Unpair your Crusher headphones with previously paired devices, and turn off the Bluetooth.

Congratulations! You have successfully reset your Skullcandy Wireless headphones.

How to Reset Sesh Evo earbuds?

Following are the steps on how to reset Sesh Evo earbuds;

1. Open the device that was previously (or is currently) paired with the Sesh Evo earbuds.
2. Go to the device’s Bluetooth settings and remove(forget) the earbuds from the pairing list. Now turn off the Bluetooth.
3. Next, remove the left earbud from the charging case and press the power button 6 times. You will see a blinking red LED light that indicates the left earbud is switched off.
4. Place the left earbud back into the charging case. Repeat the 3rd step with the right earbud and place it back in the charging case.
5. Finally, remove the earbuds from the case, and a voice prompt will inform you that the earbuds are ready to be paired with a new device.

You have successfully completed the Skullcandy Sesh Evo resetting process.

How to Reset Skullcandy Hesh and Riff Earbuds?

Here are the steps to reset Skullcandy Hesh and Riff earbuds;

1. First, remove (forget) the Hesh or Riff earbuds from your device’s Bluetooth pairing list and turn off the Bluetooth.
2. Now press both the volume down and main power buttons on your headphones for 3 seconds at the same time.
3. The LED will stop blinking, and a voice prompt will inform you that the earbuds are disconnected.
4. Wait for the voice to say ‘pairing’ to be 100% sure that the reset was a success.

FAQ

How do I reset my Skullcandy earbuds?

The steps to reset your Skullcandy earbuds depend on the specific model you have. However, you need to put your earbuds in the charging case and hold down the button on both earbuds until they turn off. Then, remove the earbuds from the case, turn them back on, and connect them to your device.

Will resetting my Skullcandy earbuds delete any of my settings or data?

No, resetting your Skullcandy earbuds will not delete your settings or data. It simply restores the earbuds to their default settings.

Conclusion

If resetting didn’t resolve the connectivity issues, you may want to contact Skullcandy customer support for further assistance. We hope this guide was helpful and your earbuds are up and running again soon!