How To Pair Senso Bluetooth Headphones
The step-by-step method for pairing Senso Bluetooth headphones with multiple devices is listed below.
Step 1
For Senso Bluetooth headphone pairing, turn your headphones on. Make sure they are sufficiently charged. If you just unboxed the headphones, it is better to charge them fully before beginning to use it.
Step 2
After turning the headphones on, hold the multifunction button for at least 3 seconds. You will notice blue and red light flashing alternatively, which would indicate that the headphone is ready to pair.
Step 3
Now turn on the Bluetooth of your mobile or PC and search for nearby devices. Keep the devices you want to pair within the range of three feet. Once the option of Senso Bluetooth headphones appears on your screen, pair your device with them.
Step 4
After you have connected both the devices, the LED will stop flashing, and a blue light will blink every few seconds.
macOS
Here are the steps to pair the Senso wireless headphones with macOS.
- Go to the Apple menu and tap the system preferences.
- Find the Bluetooth option and search for the list of available devices.
- Find your device and tap on it to connect it with your macOS.
Windows10
Follow these steps to pair the Senso wireless headphones with Windows.
- Go to the settings and search for Bluetooth. To save time, you can also search for Bluetooth directly in the search bar on your home screen.
- To add a Bluetooth device, turn the Bluetooth on and find your headphones on the list.
- Tap on the Senso Bluetooth headphone option, and your devices will connect.
Successful Pairing
After you have connected both your devices, you will notice that the constantly flashing blue and red light has only been blue. It will blink every 5 seconds to indicate that the headphones are paired.
Connect With Another Device
If you want to connect your headphones with another device, turn off the Bluetooth of the currently-paired device. Now follow the steps mentioned above on your new device to connect it with your Senso headphones.
Factory Reset
If your devices are not pairing, it is best to restart the phone or PC you want to pair. Hold the multifunction button for 3 seconds while your headphones are charging to perform a factory reset. Release the button when you see both the LED lights flash three times.
Conclusion
That is a wrap for our guide on how to pair Senso Bluetooth headphones.
Following the steps mentioned above can help you pair your Senso Bluetooth headphones in less than 5 minutes. Make sure to keep your devices nearby the headphones so they can connect easily. If you face difficulty while pairing the devices, you can try turning them off for a couple of seconds and then turn them back on.
More to check
How to Pair Soundpeats Wireless Earbuds
How to Pair Onn Bluetooth Headphones?
How to Pair Uproar Wireless Headphones?
How to Connect Tzumi Bluetooth Headphones?
How to Pair Skullcandy Crusher Wireless Headphones?
How to Pair Blackweb Bluetooth Headphones?
How to Pair Mpow Jaws Bluetooth Headphones?
I really like it. Great blog, keep it up!